드롭사이드/ 플랫베드 트레일러 Flat and low excavator trailer., Salo

Tractor-drawn excavator trailer, or perhaps an easy, low, flat base for building a transportable structure on top of. The trailer can be uncoupled from the tractor hitch, and the machine can be driven on from the front. There are also bushings at the rear if you want to build ramps, in which case it becomes a drive-through model. The trailer has carried small machines, tractors and other equipment. The carrying capacity of the trailer section is about 5–6 tonnes. With the wheels currently fitted, the load capacity is not quite as high, but around 3 tonnes. So by changing the wheels, the load capacity can be increased. Standard wheel bolt pattern. The width of the trailer section is 1,780 mm, which is also the inner width between the wheels. The trailer section length is 3,450 mm + drawbar 1,200 mm. Measured from the ground, the height is only 370 mm. The outer width of the wheels is 2,350 mm. A handy-sized trailer for moving machines or even as a base for a movable building. The trailer can be lifted onto a forklift when collected at no extra cost. It also fits behind a large car trailer, and by removing the wheels the width can be reduced to about 2,200 mm. No pickup fees/collection charges are charged for collecting the item. The pickup time can be arranged flexibly, also in the evenings and at weekends. There is no hurry with pickup either, so if needed it can be arranged flexibly.

Defects:

Rust. Used. No certainty whether all lights work.