The Jansen HS-20DS63 double splitter
is a small revolution among wood splitters. Because
this machine works in both directions (both forward and reverse!), you work twice as fast!
There is no more "empty" return and fuel consumption is also much more efficient! It
has an actual splitting force of 20 tons in the forward line (17 tons in the return line)
and a very reliable
6.5 HP Kohler gasoline engine.
The splitting pressure of our splitters is measured directly on the splitter, so this information also corresponds to the actual splitting pressure.
Thanks to the horizontal structure, the wood is always at working height.
The hydraulics are very fast. The full feed phase takes only 7 seconds. The length of the split piece can be up to 60 cm.
The splitter is extremely easy to use. The engine
is very easy to start with the recoil starter
and starts very well even
in sub-zero temperatures.
The set includes a cross wedge that simply attaches to the splitting wedge. Switching between wedge and cross is done in seconds! The length of the splitting wedge is approx. 20 cm and the cross wedge is 20 cm, and the height is 15 cm.
The Jansen HS-20DS63 can be easily towed to the job site using the ball hitch.
The device is not approved for transport on public roads. Due to its small overall width (approx. 102 cm), the device can also be transported on a regular trailer.
The Jansen HS-20DS63 comes with a high-quality Kohler engine.
ATTENTION
:
The device is delivered well packed and disassembled in a wooden box. Final assembly will take approximately 3-4 hours. The scope of delivery includes an operating manual in German. Assembly is usually easy, but may require two people to do the job as the individual parts are heavy! The first filling of the device requires approximately 10 liters of HLP46 hydraulic oil. The engine requires approximately 1 liter of engine oil. Here we recommend multigrade oil with a classification of 10W40 or 15W40.
